BLACK PRISMA ROTARY FILES

₹1,998.33

₹1,199.00Save 40%

Tax included

BLACK PRISMA ROTARY FILE IS ENDODONTIC FILES WITH 'S' CROSS SECTION AND ONE SIDE FLAT SURFACE WHICH PROVIDE BALANCE OF SUPER FLEXIBILITY AND HIGHER CUTTING EFFICIENCY.

Share this :-

Features

Cross-section- The cross-section of files is like the alphabet “S”,one side flaten surafce
Sharp Cutting Edge- The two blade cutting surface increases the cutting efficiency
Flexible NiTi Wire- Proprietary heat treated NiTi wire with high fracture resistance
Progressive Pitch- Progressively increasing pitch avoids screw-in effect
Safety Tip- Non-cutting safety tip helps to reduce ledge formation, minimize canal transportation & reduce apical extrusion
Length Marking- Helps to control the working length during preparation
Tip Size Indicator- The colored ring indicates the tip of instrument
Taper Indicator-One ring-0.04 Taper | Two Rings- 0.06 Taper

Description

BLACK PRISMA rotary file is scientifically well reasearched designed by biomechanical engineers team to have a special S-shaped cross-section,ONE SIDE flated surface allows minimum radial wall contact which translates to reduced stress on the file lead to 30% less chances of fracture. In addition the excellent upward debris auguring ensures that the debris isn’t pushed apically or packed into the apical third. Further, proprietary heat treatment ensures that the file remains highly flexible and resistant to fracture.

Key Specifications

Speed :- 400 RPM
400 RPM :- 2 NCm
COLOR OF blade :- RAINBOW
COLOR OFHANDLE :- BLACK
Cross-section :- The cross-section of files is like the alphabet “S”,one side flat surafce.
Sharp Cutting Edge :- The two blade cutting surface increases the cutting efficiency
Flexible NiTi Wire :- Proprietary heat treated NiTi wire with high fracture resistance
Progressive Pitch :- Progressively increasing pitch avoids screw-in effect
Safety Tip :- Non-cutting safety tip helps to reduce ledge formation, minimize canal transportation & reduce apical extrusion
Length Marking :- Helps to control the working length during preparation
Tip Size Indicator :- The colored ring indicates the tip of instrument
Taper Indicator :- One ring-0.04 Taper | Two Rings- 0.06 Taper

Packaging

BLACK PRISMA Rotary Files 25MM AND 21 MM :

Pack of 5 files

BLACK PRISMA Rotary Files 25mm Assorted:

5 Files Pack

08/8%
17/4%
20/4%
25/4%
25/6%

Direction To Use

STEP 1:

Prepare the access cavity and explore the canal using #8, #10 manual k files

STEP 2:

Establish the working length with the help of Electronic Apex Locator(EAL)/ Radiograph

STEP 3:

For obliterated, calcified or severely curved canals: start with #8, #10 K-File, Files till apex to achieve proper glide path,

prepare canal upto full length with manual 15# and 20# k files.

STEP 4:

Use orifice opener 10/8%,followed by blackprisma pathfinder 17

4% followed by finisher files 20/4%,25/4% or 25/6% as your requirement.

use the file in brushing motion, take the file passively to the point of least resistance and brush out of the canal and repeat the procedure until working length is achieved

STEP 5:

Always clean the cutting flutes after every few strokes, irrigate the canal and recapitulate with the K-File

STEP 6:

Use black prisma files with gentle touch, never force the file and always use the recommended speed and torque settings

Warranty

NOT APPLICABLE

AVAILABLE OFFERS